Luna Premium Hypoallergenic 100% Waterproof Mattress Protector Full Size - Made In The USA

Christmas Sales Luna Premium Hypoallergenic 100% Waterproof Mattress Protector Full Size - Made In The USA 201

Dec 25, 2011 10:48:05

Christmas Luna Premium Hypoallergenic 100% Waterproof Mattress Protector Full Size - Made In The USA Deals
Click for larger image and other views

Luna Premium Hypoallergenic 100% Waterproof Mattress Protector Full Size - Made In The USA

>> Click here to update Christmas prices for Luna Premium Hypoallergenic 100% Waterproof Mattress Protector Full Size - Made In The USA <<

Christmas Sales Luna Premium Hypoallergenic 100% Waterproof Mattress Protector Full Size - Made In The USA Feature

  • Protects against allergens, dust mites, bacteria, perspiration, urine and fluids (10 Year Warranty)
  • 100% waterproof membrane with fitted sheet style design and Sure-Fit sizing band (Fits up to 14" Height)
  • Luna Airflow Technology allows air to circulate through the protector, but repels liquids
  • Hypoallergenic cotton terry surface is noiseless, will not change the feel of your mattress and naturally absorbs moisture
  • Great for asthma, eczema and allergy sufferers (Made In The U.S.A.)


Christmas Sales Luna Premium Hypoallergenic 100% Waterproof Mattress Protector Full Size - Made In The USA Overview

Enjoy peace of mind knowing your mattress is protected from liquid spills, urine, dust mites and allergens by applying a Luna Mattress Protector. Luna Premium American Made waterproof mattress protectors are of the highest quality and carry a full replacement 10 year warranty. As many have found out, once an unprotected mattress is soiled by fluids, it's nearly impossible to fully remove. A soiled mattress can result in an unsanitary environment for you and your family and may even ruin your mattress altogether. If liquids are ever spilled onto the mattress, simply remove the protector and place directly into the washing machine. Luna premium mattress protectors are also a must have for those suffering from allergy triggers such as pollen, mold, dust mites and fungus. Luna protectors prevent allergy triggers from passing through the membrane material while still allowing the mattress to breathe. Periodically wash the mattress protector, like you would your sheets, and you'll be able to effectively remove allergy causing triggers that may be resting on the surface of the protector. Luna mattress protectors work by using premium cotton terry bonded with a hypoallergenic waterproof membrane base layer. To enable the mattress to still breathe, Luna utilizes an exclusive Airflow Technology made up of proprietary microscopic pores in the membrane layer. These pores allow air to pass through while preventing liquids and dust mites from penetrating. The protector's ability to breathe extends the life of the mattress and also works to control temperature preventing our protectors from sleeping hot. Fitted sheet style elastic sides are then attached making it a perfect fit for any mattress profile. As mentioned above, all Luna products are exclusively made in the USA and contain no PVC's or phthalates.



SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas Luna Premium Hypoallergenic 100% Waterproof Mattress Protector Full Size - Made In The USA is cheap and shipping as well.

Price : Click to Check Update Prices Please.

Luna Premium Hypoallergenic 100% Waterproof Mattress Protector Full Size - Made In The USA

Limited Offer Today!! Luna Premium Hypoallergenic 100% Waterproof Mattress Protector Full Size - Made In The USA Christmas and Cyber Monday 2011 Deals

Magnifying Loupe Queen Bed Risers Convertible Bed Rail

Soft Heat Micro-Plush Top Low-Voltage Electric Heated Twin Mattress Pad, White

Christmas Sales Soft Heat Micro-Plush Top Low-Voltage Electric Heated Twin Mattress Pad, White 201

Dec 24, 2011 14:36:22

Christmas Soft Heat Micro-Plush Top Low-Voltage Electric Heated Twin Mattress Pad, White Deals
Click for larger image and other views

Soft Heat Micro-Plush Top Low-Voltage Electric Heated Twin Mattress Pad, White

>> Click here to update Christmas prices for Soft Heat Micro-Plush Top Low-Voltage Electric Heated Twin Mattress Pad, White <<

Christmas Sales Soft Heat Micro-Plush Top Low-Voltage Electric Heated Twin Mattress Pad, White Feature

  • Luxurious ultra-soft and supportive Micro-Velour fabric top is designed to rejuvenate and warm your bed. Easy care machine washable & dryable without any pilling, shrinking or stretching.
  • Patented Safe & Warm non-hazardous low voltage technology is safer than others on the market; saves energy; sleep better in a cooler room
  • No more uncomfortable bulky wires. The ultra-thin wires inside the Soft Heat pads are almost impossible to feel; No annoying hot or cold spots
  • Convenient automatic temperature pre-heat and hold feature for cozy warm sheets; Built in over-temperature protection for safety and peace of mind
  • Single control automatically shuts off after 10 hours for convenience, safety and savings; giant backlit display with auto dimming feature for night time adjustments with out having to turn on the lights


Christmas Sales Soft Heat Micro-Plush Top Low-Voltage Electric Heated Twin Mattress Pad, White Overview

We’ve designed a safe and incredibly soft electric mattress pad that not only warms your bed, but also rejuvenates it. “Amazing” is the best word to describe this ultra-plush pad with its incredibly soft, supportive and luxurious Micro-Velour fabric top. Due to the all over penetrating warmth of this low-voltage mattress pad, you’ll start saving money on your energy bill while lowering your thermostat. Constructed within the pad is the patented Safe & Warm low-voltage technology. This low-voltage mattress pad includes a small power supply box that changes 120 volt AC home current into non-hazardous low voltage DC current (very similar to a battery) to provide warmth, protection and safety even if the pad becomes wet. Unlike other warming pads with their thick bulky wires, the heating wires in the Soft Heat pads are so small, they are virtually unnoticeable. During construction we place the ultra thin wires 3-inches apart and evenly distribute them from head to toe. The benefit to you is a pad that gives more of an even heat and has no annoying hot or cold spots. The twin size pad comes standard with one easy to read, easy to turn, non-slip computerized controller to adjust the temperature of the pad. For cozy sheets before bed time, it has an automatic pre-heat and hold feature. You simply turn it on and the pad will warm up on HI until it reaches the temperature that you pre set your dial on, and then adjusts itself to hold it there. For your safety convenience and power conservation, it has an automatic shut off feature that will shut the pad off after 10 hours just in case you forget. It also comes standard with built in over-temperature protection for that extra bit of safety and peace of mind. On the controller, a giant backlit display with auto dimming feature provides more convenience for night time adjustments with out having to turn on the lights. A fitted skirt keeps it all in place to eliminate shifting or bunching. Machine wash and tumble dry.



SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas Soft Heat Micro-Plush Top Low-Voltage Electric Heated Twin Mattress Pad, White is cheap and shipping as well.

Price : Click to Check Update Prices Please.

Soft Heat Micro-Plush Top Low-Voltage Electric Heated Twin Mattress Pad, White

Limited Offer Today!! Soft Heat Micro-Plush Top Low-Voltage Electric Heated Twin Mattress Pad, White Christmas and Cyber Monday 2011 Deals

Magnifying Loupe

8 Ideas for Decorating a Victorian Bedroom

For many a Victorian style bedroom has an antique but typically feminine feel to. The Victorian era started in the 1830's and was around until 1900 (when Queen Victoria died) and there are many variations to be had relating to the style of a Victorian bedroom but hopefully the points provided below will help you when decorating a Victorian bedroom for yourself.

Twin Bed Mattress Size

1. Bed

Twin Bed Mattress Size

A Victorian bed should be showy wooden affair or made from either cast-iron, brass or a combination of both these metals. You may be able to get a skilled carpenter to produce or adapt a full bed to queen size or merging twin beds together to produce a king size. But if you really do not have the money to spend on such a luxury there are many modern reproduction beds available at a fraction of the cost.

2. Dressing the Bed

The bed should be elaborately dressed with canopies and drapes, lots of pillows, flounces, ribbons and other trims. If you can search out your local fabric store and see if they have period type quilts etc., available.

3. Tables

It is important that you include either a marble topped table or cabinet in your room design as well as a wicker, bamboo or faux bamboo table, round or skirted table as a nightstand. Why not visit your local junk or antique shop to see what turned and carved wooden tables they may have for inclusion in your design from that era.

4. Lighting

It is vital that you get the lighting right in decorating a Victorian bedroom and this should include the classic ginger-jar style, or those that are made from porcelain, crystal or brass. You may even decide to use candlestick holders which have been transformed to be used as a light. Under each lamp you should place a crocheted doily for obtaining the authentic period look.

5. Dressers & Chest of Drawers

These should be typically made from either dark stained oak, mahogany or walnut and be embellished with carvings, pediments and have either ornate brass or carved wooden drawer pulls. You may be lucky to find ones that also have a candle stand, tilting mirror and marble top to them.

6. Flooring

To provide that authentic Victorian look to your bedroom use Oriental area rugs or straw type mats. You may if you wish us hooked or machine loomed rugs that have a floral or a swirly abstract pattern on them.

7. Accessories

Such accessories you should include in your room are period pictures (include subjects such as botanicals, children, maidens (young women) and animals in these pictures). Also include an elaborate golden or stained wood framed mirror in to your design. If you can also place fresh flowers in period style vases in the room and visit your local junk or antique shop to find some Victorian style collectibles for inclusion in your design such as china dishes and figurines.

8. Windows

These should be dressed with full curtains or drapes which have ruffles, valances, braid, lace, bows and tassels on them (but you don't need to have every just one or two will suffice). The materials your should be using to dress your windows should be either velvet, brocade, delicate florals and then layered with lace sheers.

So decorating a Victorian bedroom can be quite easy all you need to do is just carry out a little research and hopefully you will be able to design and decorate the bedroom of your dreams.

8 Ideas for Decorating a Victorian Bedroom
Twin Bed Mattress Size

Christmas Sales Intex Deluxe Pillow Rest Rising Comfort Twin 201

Dec 23, 2011 18:21:39

Christmas Intex Deluxe Pillow Rest Rising Comfort Twin Deals
Click for larger image and other views

Intex Deluxe Pillow Rest Rising Comfort Twin

>> Click here to update Christmas prices for Intex Deluxe Pillow Rest Rising Comfort Twin <<

Christmas Sales Intex Deluxe Pillow Rest Rising Comfort Twin Feature

  • Twin-sized inflatable mattress with quality-tested 21.2-gauge waterproof flocked top
  • 15-gauge vinyl beams, sides, and bottoms for added stability while you sleep
  • Built-in, high-powered electric pump makes mattress easy to inflate and deflate
  • Customizable comfort level; 300-pound capacity; includes duffel bag for storage
  • Fits twin size fitted sheets; measures 80 x 19 x 40 inches (W x H x D); 90-day warranty


Christmas Sales Intex Deluxe Pillow Rest Rising Comfort Twin Overview

Deluxe Pillow Rest Bed includes built in pump. Adjust to any level of firmness with the touch of a button. Inflates in 2 minutes. Mattress top is raised 16-3/4" from the floor for convenience.

Christmas Sales Intex Deluxe Pillow Rest Rising Comfort Twin Specifications

A deluxe version of Intex's ever-popular Pillow Rest airbed, the Deluxe Pillow Rest adds a sturdier outer layer, making it even more stable and comfortable than the original. The Deluxe Pillow Rest is equipped with a quality-tested 21.2-gauge waterproof flocked top, along with 15-gauge vinyl beams, sides, and bottom. The resulting surface is snug and secure, whether you're sleeping at the in-laws' overcrowded house or setting up a guest bed in the basement. In addition, the Deluxe Pillow Rest is remarkably easy to inflate thanks to the built-in, high-powered electric pump, which does its job in just a few short minutes. No more fussing with tiring hand or foot pumps or rummaging through the garage for your detached electric pump. And should the mattress feel a little too soft or firm, you can customize the comfort level with the touch of a button.

The Deluxe Pillow Rest is raised 19 inches from the floor, making it far taller than most inflatable mattresses, and includes a built-in pillow for added comfort. And at 80 by 40 inches (W x L), the mattress is an official twin size, making it a good fit for fitted sheets. The Deluxe Pillow Rest twin airbed--which offers a capacity of 300 pounds--comes with an AC power cord, a shoulder strap, and a duffel bag. It's also backed by a 90-day limited warranty.



SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas Intex Deluxe Pillow Rest Rising Comfort Twin is cheap and shipping as well.

Price : Click to Check Update Prices Please.

Intex Deluxe Pillow Rest Rising Comfort Twin

Limited Offer Today!! Intex Deluxe Pillow Rest Rising Comfort Twin Christmas and Cyber Monday 2011 Deals

Toddler Bed Safety Oak Counter Stools

How to Make a Couch From a Twin Mattress

An average twin mattress measures about 39 inches by 75 inches. There are also those made slightly longer for people who are significantly taller. This is also a good size for a guest bed. But what if you are not using your twin mattress anymore?

Twin Bed Mattress Size

Here is one good idea-you can use it as a couch. If it has a bed frame with it, make sure the ends are uniform with each other so it really looks like a real couch. Here are some more steps you can use:

Twin Bed Mattress Size

Step 1: Go to the mattress store and pick up bed covers. If you can't pick an attractive design that will suit well with your living room's color scheme, you can always make your own. Just follow the pattern of the old bed skirt of your twin bed.

Step 2: Pick pillows, pillow cases and bolsters. It does not have to be the exact same color of the bed cover it can be a different shade. Also get pillow cases with prints so you can mix and match.

Step 3: Now dress the mattress with the mattress skirt and covers. Make sure you tuck the ends carefully so the seams are not showing or the ends are not dangling.

Step 4: Now you can place the bed frame with the long side to be fitted to the wall. The wall will serve as the back rest and the headboard and the footrest will serve as the arms of the "couch". Place the mattress on the bed.

Step 5: Decorate the mattress with pillows. Prop the pillows to the walls and arrange them in a diagonal way. Mix and match the printed ones and the plain-colored ones. Place the bolsters in front or at the sides of the mattress.

Step 6: You might also want to put decorations at the wall. Put paintings with the same color scheme as the bed so you can tie the color up in your living room. You might also want to add a mattress topper to add height to the couch. This will also give more comfort to the mattress.

If you have guests over, this can again be transformed into a bed. You do not have to purchase a separate bed and a separate couch if you are on a tight budget. This way, you can save much on money plus you can get points for creativity.

How to Make a Couch From a Twin Mattress
Twin Bed Mattress Size

Corner Drawer Unit

How to Clean a Motorcycle Carburetor, The Right Way

I get asked about Carburetor Cleaning regularly both from readers and from friends offline. So I've decided to write a definitive guide for cleaning carbs the RIGHT way. So put your tools down for a minute, grab a beer, and give this a read. You might just save yourself a lot of headache and sweat.

Twin Bed Mattress Size

Carbs come in many shapes and sizes. Single carbs, dual carbs, racks of 3, 4 or 6, V racks, carbs with ticklers, carbs with accelerators, carbs with asynchronous designs, and carbs that operate vertically. While working on some carburetors is more difficult (due to design) than others, they all share the same basic components, and the process of cleaning those components is generally indentical.

Twin Bed Mattress Size

BEFORE YOU START

Make sure that dirty carbs are actually your problem. Lots of things can make a bike run poorly or not start. Weak battery, corroded electrics, old spark plugs, bad timing, low compression, mis-adjusted valves, dirty air filter, and plugged exhausts can all cause poor running. I'll write an article eventually on how to diagnose poor running conditions shortly, but for now - lets just deal with the carbs.

OK, SO YOUR CARBS ARE DIRTY

Once it has been determined that the carbs are the problem it's time to get to it. Some racks of carbs are easier to remove than others. If you're working on a newer model bike the rubber boots from the airbox to the carbs and the manifold boots from the carbs to the motor should be relatively soft and pliable. On older bikes however this is rarely the case.

First remove the fuel tank, seat, and side covers. Depending on your model of bike other parts may need to be removed too. For many single cylinder bikes the carb can often be removed without removing any body work at all.

The bike below is a 1983 Yamaha XJ750 Seca with 4 inline Hitachi carburetors

You'll want to loosen the circle clamps on all of the rubber boots. Sometimes I'll even take them all right off (carefully, without bending them too badly) so that they aren't in the way.

Inspect the airbox. On many bikes it is bolted in place to tabs on the frame. Remove those bolts and try to create as much space as possible for the airbox to pull backwards.

Next, put the bike on it's centerstand and straddle it facing forward. Put your right hand on the right-most carburetor and your left hand on the left-most carburetor and get ready to sweat. Sometimes you'll be able to pull the carbs straight backwards nice and easy, but that is pretty rare. I usually end up rotating them up then rotating them down as best I can while pulling backwards furiously. This can really take some work and time, especially if you've never done it before. In real extreme cases where you simple can't get the carbs to pull backwards out of the manifold boots I have a couple tips. These tips should only be used in extremely difficult cases when you have been struggling for an hour and simple can't get the carbs to pull backwards out of the manifold boots.

Tip 1: Ratchet Straps - This is sort of a last resort, but it has worked without fail for me when I'm pooling sweat on the garage floor and the carbs aren't budging. Wrap a ratchet strap around one of the outer carbs and put the hooks somewhere on the rear of the frame. Then slowly ratchet the carbs right out of the boots. Be careful not to pull them too cockeye'd or you could damage the boots. Attach a second ratchet strap to the other side if necessary. (Note: you can do this in the opposite direction to force carbs back into the boots once they are clean.)

Tip 2: Full Pull! - You should do this before you do the ratchet strap method above. Sit down on your butt along one side of the bike. Wedge one of your feet up between the forks and the front fender, then put both hands on the same outermost carb and PULL PULL PULL! This might not work so well if you're short! Ha.

Ok, So The Carbs are pulled back

Chances are the airbox boots are all crammed up now. Do your best to rotate the carbs up and out from the boots and pull them out one side of the bike. Sometimes it's easier to pull the carbs out one side than the other, so have a look to see if there are frame elements, motor elements, or hoses that may block the carbs from coming out on one side.

Also keep note of the throttle cable(s) and choke cable (if there is one). Now may be a good time to loosen the nuts that hold them in place and disconnect them.

Struggle just a couple more minutes wriggling the carbs out the side.

Ok, You have the carbs off the bike

Make sure you brush off any loose dirt or grime, then flip the carbs over and remove the screws from the corners of the carburetor. Some carbs won't have bolts in the corner and instead have a wire latch over top which can just be forced over.

Remove the bowls.

If the carbs are real gummed up the insides might look like this:

It's obvious that these carbs are all clogged up. Some carbs might not look so bad, some might be a lot worse. It's always a mystery what will be inside the bowls.

Now it's time to remove the floats. It's generally a good idea to drench everything in carb cleaner (available at any autoparts store). Sometimes the pins will practically fall right out, sometimes they'll be so stubborn you won't think they'll ever come free. But they will! Carefully push on the pin from either side. Sometimes a nail and a gentle tap from a hammer is helpful. **BE CAREFUL**, using force to remove a stuck float pin can break off the pin tower. If they are really stuck and you can't seem to work them free here are a couple tips.

Tip 1: Heat - Adding a little flame to the float pin towers can help. **Don't Burn Down Your Garage!!**

Tip 2: Pliers - Using pliers to gently clamp the end of the pin and push it through has worked well for me in the past. **Don't break the towers!!**

Once the float pin is out you can remove the floats, the float needle, and unscrew the float jet screen.

Set everything aside. Next remove the main jet, pilot jet, and idle jet (if there is one). They should come out easily with a flathead screw driver.

Set them aside.

Next flip the carburetors back over and remove the caps. Underneath the caps is a rubber diaphram with a spring. Sometimes the caps have a tendency to shoot off the top, so be very methodical when removing the screws. Other times the cap tends to stick down until you start to pry at it, then it shoots off, again, just be cautious and don't loose any parts.

Next you'll want to gently pull the slides up out of the carburetor body. You can gently pull on the rubber diaphrams, but be very careful not to tear them. If they don't come up easily stick your finger into the carb intake and push the slide up with your finger. You can also gently pry it with a screw driver (gently). If it doesn't want to budge don't force it. Instead finish reading this article and pay attention to the boiling tips further down.

Now your carbs should be pretty well emptied out. If the throttle on the bike moved fluidly and smooth there is little reason to do much to the carb bodies themselves. However, if the trottle was real sticky or frozen there are a few things you can do to free it up. Sometimes just drenching all the throttle components on the carbs and letting it soak is enough, other times it is not. I generally try to break racks of carbs apart. It isn't often necessary and can be confusing to put everything back together in the right places. Also, the little rubber connector hoses and o-rings have a tendency to crack or leak if you mess with them. If you can't work the throttle back and forth until its smooth have a look at the boiling tips further down.

Keep it Neat

Organization pays off.

Clean the Main, Idle and Pilot Jets

Hold each jet up to the light and see if you can look through it. The idle and/or pilot jets have extremely small holes so make sure you are looking through them straight. If you can see through the jet it isn't clogged. There could be a little gunk built up around the edges so spray them down with carb cleaner and let them sit a bit.

If you can't see through the jet it is clogged and needs to be cleaned. Always try the easiest things first. Here's an ordered list of a few things you can do to clean the jet.
Blow through it. - Rarely works, but hey, who knows.
Compressed air. - Force 100 pounds into it. Works occassionally. Make sure to hold the jet tightly so it doesn't go flying across the garage. You might put the jet back into the carb body to hold it in place for this.
Soak it in cleaner. - When I first started cleaning carbs I thought carb cleaner would be the magic answer. It isn't. In fact, I hardly ever use carb cleaner any more, because it simply doesn't do a very good job of anything but removing varnish from the bowl and slide. But try this.
Poking it through. - Collect a few different diameters of needle like objects. A wire from a steel bristle brush works well, a bristle from a broom works well, a baby pin, small sewing needle, etc. Very gently try to poke it through the jet. If you are using a metal needle use caution, brass jets can scratch and deform easily.
Boiling! - This works better than anything. Toss the jets into a pot of boiling water and let them bounce around for a couple minutes. When you pull them out blow some compressed air through them and you'll most likely be good to go.

Some idle jets can be real tricky and never seem like they'll be cleaned out . . . Just keep working at it, I've never met a jet that couldn't be cleaned.

Cleaning the Choke and Air Mixture Screw

Air mixture screws have a tendency to strip or break. If the carbs were real gummed up you might find that the air screws are stuck. Don't force them, if they don't want to come out, just leave them for now. It is fairly rare that these screws will need to be cleaned because they are above the float level. If you can get them out just wipe them down with carb cleaner and spray some through the jet.

Cleaning the Slide and Needle

These are easy to clean. Squirt them with a bit of carb cleaner, wd-40, or anything similar, then wipe them down with a rag. Once the varnish is gone they're good to go. Sometimes they get heavy varnish on them which I will scratch off carefully with a piece of plastic. Scratching the slide and needle is a BAD thing, use caution.

Cleaning the Carb Bodies

Use the same squirt and wipe method noted above. Most of the time the other pressed jets and passages in the carburetors won't be clogged. But if the bike has been sitting a real long time with squirrels in the airbox it is certainly possible. Us a compressor to blow some air into every passage you can see. Listen for the air coming out the other side. If no air compressor is available use a can of WD-40 with a straw attachment.

If some of the pressed jets are clogged it can be difficult to open them up. There are a few things you can do.
Carb Dip - Most autoparts stores sell carb dip. It comes in a can similar to a paint can and is a VERY harsh cleaning agent. Soak the entire carbs in this dip. This dip can eat at rubber and plastics if they are submerged for too long, so try and remove everything you can from the carb bodies before soaking them. Once you pull them out swish the carbs around in a bucket of water to clean off the excess dip, then hose them down with WD-40 to get rid of the water.
Boiling in Water - Not many people do this but it is by far the best way of cleaning carburetors. Dropping the carbs into a pot of boiling water will instantly free up stuck slides, throttle plates, and other frozen parts. It will also loosen the dirt and grime clogging up pressed jets and other passages. Just make sure to dry the carbs thoroughly with compressed air or the sun afterwards.
Boiling in Lemon Juice - There is NOTHING BETTER at cleaning carbs than a giant pot of boiling lemon juice. The acidity from the lemons eats through everything; gas varnish, oil build up, dirt, grime, etc. Sometimes I won't even bother doing anything but this - I'll just remove the bowls, remove the caps, then drop everything into the pot and let it sit for 20 minutes (rotate them a few times). The one caveat to doing this is that you'll want to wash the lemon juice off the carbs as soon as you pull them out. So have a bucket of water ready, or a can of WD-40 to hose them down. Also note that the acidity has a tendency to put a dull finish on the aluminum bodies of the carbs. This isn't a problem in most cases, but if you must have everything shiny be prepared to do a little scrubbing and polishing afterwards. It may sound weird, but trust me, I just saved you LOTS of time. (Most dollar stores sell 1/2 gallon jugs of lemon juice, so buying a few gallons will only cost you . Plus you can put it back into the bottles afterwards and save it for next time.)

Cleaning the Bowls

This is pretty straight forward. Use any of the methods above to tranform your varnished bowls.

Most carb bowls are simple, just clean them up and they are good to go. But I picked this Hitachi's for photos because they have a jet built into the bowl. You can see the 'fifth' hole along the edge of the bowl, that is actually a thin passage that extends to the bottom of the bowl. This is for the idle jet and is extremely important. If these passages are clogged, the bike won't stay running, period. Use the same poke, soak, and boiling methods outlined elsewhere in this article. Not all bowls have these passages, only some, if your's don't - good for you!

Once Everything is Clean

Now that everything is clean it's time to put it all back together. Take your time and make sure you put everything back where it came from. WD-40 is your friend. When screwing in the jets don't over do it, they only need to be seated and snug, do NOT use any force putting the carbs back together.

If the bowl gaskets got goobered up you can put a little RVT on them. So long as the float needles are still in good condition leaky gaskets shouldn't be an issue. However, prudent carb tinkerers may want to order replacements if necessary.

Once the carbs are back together stuff them back into the bike!

Extra Notes
Rebuild Kits - This guide did not mention rebuild kits until now. Rebuild kits (consisting of new gaskets, jets, needles, etc) can be purchased for nearly any bike, both old and new. 95% of the time these are NOT needed. I have rebuilt enough carbs to block off main street, and only once have I used new parts. ONCE!
Carburetor Adjustment - Carburetor adjustment, setup, jetting, and synchronizing is a whole encyclopedia waiting to happen. Those topics are not covered in this article, but I will address them in future articles.
Carburetor Polishing - External carb asthetics will be important to some, and not to others. Cleaning is all I am covering here, this will be addressed in the future.
Work Space - Make sure you have lots of space to keep organized. I also like to work on a wooden surface because it absorbs the spilled gas and cleaners rather than pooling.

That's it! You're Done!

I'll continue to write a couple more related articles about diagnosing carburetion issues as well as the proper way to adjust, jet, and tune your carbs.

How to Clean a Motorcycle Carburetor, The Right Way
Twin Bed Mattress Size

Pack And Play Mattress

You Can Be a Cruise Ship Owner Even If You Are Not Rich

Unlike fractional ownership of aircraft and houseboats, fractional owners of a cruise ship can all use the ship simultaneously. There is plenty of room for you and the other owners to live on the ship any time you want, or all the time. You can use it as a full-time residence, and so can the other co-owners.

Twin Bed Mattress Size

The first obvious benefit of shared ownership is acquisition cost. There are many cruise ships on the market in all price ranges, sizes, ages, and conditions. There are many smaller and older cruise ships available for less than one million dollars. At the lower end, some smaller cruise ships in fair condition can be acquired for about 0,000. At the highest end, the biggest new mega cruise ships now cost about 0 million to build.

Twin Bed Mattress Size

Do the math. If one hundred buyers pool resources in exchange for a percentage of ship ownership, the acquisition cost will be divided by that same number. One percent ownership of a 0,000 cruise ship would cost a mere 00 for ship acquisition. At the other end of the scale, one percent ownership of a brand new mega cruise ship would cost five million dollars.

There are some other figures that must be tabulated into the total cost of ownership. Acquisition cost is first and foremost. The next figure is the cost to put the ship in service. On an older ship this cost may be higher than the acquisition cost. On the other hand, the cost to put a ship into service can be much lower if you were to get a good deal on a ship that already meets the international standards for ship safety, especially SOLAS (Safety of Life at Sea). Maintaining compliance with Chapter II SOLAS 74 amendments is cost prohibitive for some older ships and they are typically scrapped instead of being refurbished at great expense. There is a very important SOLAS implementation date coming up on January 10, 2010. On that date all commercial international ships will be required to be in compliance with the new fire safety codes. The most important new codes deal with the use of combustible materials in the ship. It will be expensive to replace all combustible materials in ships with non-combustible or flame resistant SOLAS compliant materials that meet the new safety standards. This will result in many ships being sold for scrap metal.

The looming SOLAS 2010 implementation date offers both perils and opportunities. The biggest peril is the possibility that the expense to bring a ship into full compliance with international standards will be greater than the value of the ship. However, there is a silver lining in this cloud. This pending SOLAS implementation date has already started to show up as a primary factor in the asking and selling prices of ships on the market today.

SOLAS 2010 also offers a tremendous opportunity for those who may prefer to have a very large houseboat instead of a commercial ship. Ships that are not in compliance with SOLAS 2010 are now selling for a song (inexpensively). A cruise ship can easily be converted into a megayacht with the stroke of a pen. Privately owned yachts, not in commercial service, and not carrying passengers or cargo for hire are exempt from many of the SOLAS requirements. Operating costs are also lower for a private yacht. It cost less to register, flag, and insure a private yacht. Megayachts can be flagged and classified for unlimited service. That means that a megayacht can go practically anywhere you want it to go. There is one major drawback to registering a cruise ship as a private yacht. You cannot use the yacht commercially. This cuts off a potential revenue source.

There are many decent cruise ships for sale at prices of less than one million dollars that would make good private megayachts. For example, take the 'VERGINA SKY' is a ship that I have personally inspected and so I can talk first hand about it. The asking price was 0,000. Here are the specifics of the ship in a nutshell:

Current Name: Vergina Sky

Ship Details: Built: 1971 in Japan - totally rebuilt 1992 in Greece

Dimensions: LOA 97.8m x LBP 82m x beam 14.6m x draft 4.49m Dwt: 500 on 4,49 GT/NT: 4,668 / 1,717

Description: Pielstick 2 x 8400bhp, twin screw, bow thruster, 3 x 500kw generators, 16 knots, 2 saloons, restaurant, 3 bars, casino, duty free shop, disco, swimming pool, 120 cabins for 318 guests. Lying Greece

My Comments after inspecting the ship

This is a well built little 'Pocket Cruiser.' At just over 320' in length overall, it is a small cruise ship. Many experienced cruise passengers prefer smaller more intimate cruise ships for a variety of reasons. This ship can go places where the big cruise ships cannot reach, such as shallow draft ports and even many rivers. It has an omni-directional bow thruster and can turn on a dime (relatively speaking of course). I have carefully examined this ship from the engine log to the ultrasound hull report. This is a sound and safe little cruise ship. It is also a very fuel efficient and economical ship. My first time on this ship was in the middle of the summer in Greece when it was very hot outside. The ship is fully air conditioned and it was cool and comfortable inside the ship. I checked the engine room to see how many generators were running. I am happy to report that all the electric and air-conditioning requirements can be met by running just one of the three Daihatsu generators. These generators are very economical to operate in terms of fuel consumption and maintenance.

I was able to negotiate with the owner, John Kosmas and get some concessions. I got the price down to 0,000. And at that price, he agreed to bring the ship into compliance with SOLAS 2005 and also to include new paint topside. The ship was fairly well furnished even including bed linen, but the ship had been laid up for years. Its most recent service was in the Mediterranean and Black Seas. Cruise ships that trade exclusively in the Mediterranean and Black Seas tend to have smaller cabins and fewer amenities than the typical cruise ships that frequent the Caribbean. The bottom line is that this ship was an economy model, not a luxury model. When I was inspecting the engine room, I asked for the engine log. When I opened it I noticed all the entries were in Greek. I was able to discern some dates and other data that told me when the ship was last in service, but I could not read the Greek entries so I handed the engine log back to the ship owner, and told him "It's all Greek to me." Being Greek, Mr. Kosmas failed to find the humor in that.

Let's look at the numbers on this ship. 100% of the acquisition cost would have been 0,000. 1% thus = 00. One hundred buyers could own one percent each. There are 120 cabins so each co-owner could have a private cabin with 20 cabins left over. However, these cabins are a bit on the small side. Every cabin does have a bath and shower, but the size is just too small to be comfortable for most people, especially if the owners intend to live onboard full time. On a ship this size I would recommend that there be no more than 60 joint owners so each can have two cabins and will have the option of converting those two cabins into a two room suite. To keep the numbers simple lets say that this ship has 50 buyers who each buy 2% of the ship. Buy in cost per owner would then be ,000. If there were only ten buyers, then the acquisition cost per buyer would be ,000. ,000 will not buy much of a house on land, but on this ship it would buy 10% of a ship like the Vergina Sky and twelve cabins that could be converted into a fairly large home.

At the economy end of the scale, a co owner could buy 1% of an economical cruise ship for about 00. However it is not necessary for all co owners to have equal shares in the ship. Ownership can easily be divided up into 1% increments. If one buyer wanted 5%, then his cost of acquisition would be ,000. He would be entitled to 5% of the ship's cabins, and would have five votes on operations and management of the ship, such as itinerary planning.

Before becoming a joint owner, it would be imperative to find other people who have similar goals. I would suggest composing a preliminary DCCR (DECLARATION OF
COVENANTS, CONDITIONS AND RESTRICTIONS). You can do this before you even shop for a ship. Write your version of how you envision the shared ownership of a cruise ship as it should be. Then see if you can find some people who agree with your goals and your DCCR, subject to some revisions and concessions to accommodate other joint owners.

Step One: Determine if you and your family have the desire and financial capability to become joint cruise ship (or megayacht) owners.

Step Two: Find others who agree with your concept for shared ownership of a ship.

Step Three: Shop for a ship. This is the fun part.

Step Four: Buy a ship.

Step Five: Put the ship into service.

Even if you are not rich, you can afford to jointly own a cruise ship. But then comes the next logical question: Why would you or anyone want to live on a cruise ship? Who would this be suitable for?

If you are retired or otherwise have a stable income from a dependable source you probably can afford to be a cruise ship co-owner and live full-time onboard a cruise ship. If you work in a field where you can work from home online, then you too can probably afford to become a co-owner of a cruise ship. Most modern ships have satellite Internet service available 24-7.

Operating a cruise ship is expensive. The expenses include the cost of fuel, labor, maintenance, repairs, spares, food, port charges, insurance, technical management, shore management, registration, and the other costs of operating the ship. At first glance these costs may seem expensive, but in reality the cost of living at sea is actually a bargain considering what you get based upon what you pay. The best value does not always translate to the cheapest price. If the ship is well managed, the management will seek the highest quality goods, services, and labor at the very best global value. If the owners are dissatisfied with either technical or shore management, they replace them.

If there are many other co-owners of the ship to split the operating expenses of the ship, it can be affordable for those with a moderate level of income, such as a retirement check. I do have specific operating cost figures but I won't bore you with that data. The bottom line is that it would not be prohibitively expensive for a middle-class average person to be able to afford to own a fraction of a cruise ship and be able to afford to live on the cruise ship full-time if they elect to do so.

For comparison purposes it is noteworthy that you have expenses in land based housing too. Those expenses include property taxes, homeowners insurance, maintenance and repairs, yard care, and utilities. Additionally you have transportation costs and of course food costs. Most people also spend money on entertainment too. When these expenses are added up the maintenance fees for living aboard a ship are comparable.

There are actually some savings resulting from living aboard a ship. The ship's executive chef buys food and kitchen supplies in bulk for the ship and can get better prices than the average shopper. Other savings result from the large freezers and the mobility of the ship giving the food service management the ability to stock up on supplies in countries where prices are low. Some crew and owners may choose to fish for leisure. This can supply some fresh food at even lower costs to the owners. Labor savings are realized when the crew is hired based upon the best global labor rates. The laws of supply and demand drive prices down in some places in the world. Proper ship management can capitalize on these disparities. All the savings would be passed on to the cabin owners resulting in an economical cost of living similar to what you could expect to spend with a conventional home. Ship management should have accounting transparency will all books (financial records) open and available for any owner to inspect. Also ship management should submit all financial records quarterly to an outside auditor for the peace of mind of the owners. Anybody in the chain who spends any of the ship's operational funds should also be periodically audited. For example, a good way to audit the executive chef would be for one or more of the live-aboard co-owners of the ship to go to the food market district of each port of call and they should try to haggle and get a better price for the same food than the price the executive chef was able to acquire. If the executive chef cannot find better deals than the ship's co-owners, then the executive chef should be given his walking papers. The executive chef position is a vital position on a cruise ship. This is a position of trust because he will bill the food he buys to the ship. He must never be tempted to accept bribes from vendors or suppliers. Therefore, he should know that he will be routinely audited and any substandard performance will result in termination of his employment.

The biggest value of all onboard cruise ship is in labor costs. The better cruise ships tend to be labor intensive, providing passengers with unrelenting attention and extravagant pampering. The hotel staff on all cruise ships provides the basic services including food preparation and serving, laundry, cabin stewarding, entertainment, casino operation, beauty shop operations, This is one area where I would prefer to not scrimp because of the very good value in these services due to the low cost of international labor. I would prefer to go beyond the level that most cruise ships go in the area of spas. Land based luxury and specialty resort spas are very expensive, but the exact same level of service, professionalism, skill, and treatments can be provided on a cruise ship at extremely low cost. Labor is the key and the primary reason for most of the expense of spas. Labor is a tremendous value on a cruise ship because the cruise ship managers can choose workers from the global marketplace where it is easy to get the best value for the money.

Spas

Spa treatment is customized for each client. Spas commonly offer services such as:

Soothing massage therapies, skin and body treatments drawing from European and Eastern principles, expert hair and nail services, and a full menu of therapeutic treatments utilizing a deep-cleansing facial at the start of the program, as well as a series of detoxification and contouring wraps, lypo-reduction wrap, as well as marine mud and herb wraps. Massage Therapies including: Swedish Massage, Shiatsu Massage, Deep Tissue Treatment, Maternity Massage, Therapeutic Foot Massage (Reflexology), French Hydrotherapy Massage.

The healing therapies include a variety of massages, reflexology, facials, firming and many other body treatments. Plus a wide variety of services and wellness programs specially designed to meet the individual's needs and desires. A full service salon offers all manner of hair treatments (including a certified colorist), as well as a variety of manicures, pedicures, and 'facelifts' for your hands. Extensive skin care includes: Age Management Therapies including, Glycolic Facial, Anti-Aging Facial Peel, Microdermabrasion; Facials including: Aromaplasty Facial, Teen Facial, Gentleman's Facial, Nutrisource Facial, Regulating Acne Facial, Vitamin "C" Skin Renewal Facial; Body Treatments including: Decleor Sauna Mask, French Hydrotherapy Massage, Andromeda Salt Glow, Mummy Mud Mask, Seaweed Body Wrap, Safe Sun Treatment, Herbal Wrap; as well as various hair and nail treatments.

Additionally, spas also can facilitate weight reduction programs, and even administer physical therapy. In short, you can be treated like a king, on the budget of a pauper.

Labor Costs - International competition provides the most value to the ship owners.

On paper it seems to make good sense to man the ship with a Philippine crew. I love the Philippines. I have been there several times. English is still widely spoken and usually spoken quite well. The people are usually friendly and happy to see foreign tourists. A large percentage of ships worldwide are manned by crews from the Philippines. The Philippine government has a pretty good structure and system to facilitate the export of Philippine labor. In spite of how attractive it seems on paper, I would recommend NOT hiring a crew from the Philippines. Philippine workers tend to be envious of others, and especially of everybody else's wages. They tend to think they are getting the raw end of the deal. It is rare to find a Filipino who is happy with his employment. While I am sure there are many good employees from the Philippines, there are more who are dissatisfied than satisfied with their employment. There seems to be a cultural anomaly in the Philippines where people feel that employers are bad guys. I would hesitate to recommend a crew from the Philippines in spite of the apparent advantages on paper.

My recommendation (for what it is worth)

I do know something about what I am writing about here. I am the former President of Adventure Spa Cruise. My advice is not just uninformed ranting. Back to the point now, the second best manning nation for a ship is India. I highly recommend India for the medical staff and the entire hotel staff, including the spa, and every other position except the deck and engineering. The labor costs in India are very attractive. I would also recommend using an Indian based manning agency. It is best if the ship's owners do not have to deal with every employee issue or concern. The manning agency takes the pressure off the ship's management, and their service is very reasonable. Indian employees tend to make better employees than do Filipinos. Indians also speak English, albeit not quite as well as Filipinos. I know Americans tend to get all worked up when someone uses a broad brush to paint an entire ethnicity. I love the people from the Philippines, but as employees they tend to be more problematic than do Indian employees. I realize that this statement is politically incorrect, and these days that might get me thrown in jail. I usually do not worry so much about being politically correct. I call it the way I see I and I let the cards fall where they may, and hope I can stay out of jail for speaking my mind.

All deck and engineering positions should be filled with an all Ukrainian crew. The ship will realize the most value for the money with Ukrainian deck and engineering staff. The Ukraine has a long maritime history and tradition. Maritime training and standards in the Ukraine are among the best in the world. Ukrainian deck and engineering staff are as good as or better than any other, but the cost of their labor is a very good value. The labor for deck officer and engineering staff are governed by international agreements, including STCW (Standards of Training, Certification and Watchkeeping for Seafarers).

Putting a cruise ship into service

After acquiring the ship, it will require some more investment to put it into service. At this point the joint owners will need to reach some agreements on many points. The cost of putting a cruise ship into service as a megayacht (very large private yacht) is much less than putting the ship into commercial service. However, if you can afford to buy a ship can easily meet SOLAS 2010 requirements, and can afford to flag and register it as a commercial ship then you can use the ship commercially to produce income and ROI (return on investment).

There are many marketing options for a commercial cruise ship. If the owners use no more than half the cabins, then that will leave sufficient means to produce enough revenue to at least pay for operating costs, and possibly produce a profit above operating costs. I will just briefly touch on some of the options available for marketing cruise ship capacity.

1. Conventional cruises. There is a trade-off here. You can produce revenue by providing conventional cruises. This will require that the ship have an itinerary that suits the commercial cruising market.

2. Freight and cargo. Some cruise ships have enough cargo capacity to produce some revenue by booking freight.

3. Assisted living. A cruise ship is well suited for assisted living, including crew and facilities. The going rate for assisted living in the average city in America is higher than the average cost of a cruise of the same duration.

4. Timeshares. This is an option not available to conventional cruise ship operators but could be facilitated if your co-owners agree to this type of marketing to fill cabins not used by co-owners. I will not go into the figures here, but timeshares tend to be high profit sales. There is a good chance that if the joint owners use no more than half the ship's cabins for their own personal use, the remaining cabins could easily produce more than the total amount all the joint owners combined have invested.

Ships that would easily meet SOLAS 2010 tend to cost a bit more money to buy up front, and cost more to put into service. So I will give you couple of examples.

The Orient Venus is one of my favorite high-end ships. The specs:

M/V ORIENT VENUS

BUILT: JULY 1990 AT I.H.I.TOKYO

JAPANESE FLAG

JG. NK OCEAN GOING

GRT: 21,884 TONS

DWT: 4,863 TONS ON 6.50 M

LOA x B x D : 174.0x24.0x8.7 M

M/ENG: DIESEL UNITED-12PC2-6V x 2 SETS ,

TWIN SCREW CPP

SPEED: SERVICE ABT21.0 KNOTS / ABT 56.70MT /D

FUEL TANKS CAPA: IFO 1,500.4 M3 /MDO 87.30M3

GENERATOR: 1,600KWxAC450Vx60HZx 3 SETS

ENGINE ROOM M0 SYSTEMS

CRUISING RANGE: ABT 7,000MILE

PASSENGERS: MAX 606 PERSONS

CREW: 120 PERSONS

ABA WOG

DELIVERY: BY ARRANGEMENT

INSPECTION : KOBE.JAPAN

OWNERS PRICE USD 22 MIL net here

My personal assessment of the Orient Venus

It is a late model and beautiful ship. It has many highly desirable attributes for a residential ship. It is a high end luxury cruise ship with an extraordinarily high tonnage to passenger ratio. This is very important for a residential ship. More living room and more space per passenger is far more essential for a residential ship than for a conventional cruise ship. When passengers are only on a ship for a short time, they can tolerate cramped living quarters, but when they live year-round on a ship, the extra space is quite valuable. The owners have been trying to sell this ship for ,000,000. That may seem like a high price, but when you divide it by the number of cabins (195) the asking price per cabin is 2,564. This price is in line with what you would expect to pay for a condominium. The last word I got from the owners is that they will sell the ship for ,000,000 now (,307 per cabin). The cabins are all "outside" cabins and are large. The ship can accommodate 606 passengers and a crew of 120, for a total of 726 people.

Several ship brokers have this ship listed. I usually do not talk to ship brokers. I prefer to talk directly with the ship owners. I am in contact with the owners of the Orient Venus. I could probably get this stunningly beautiful ship for less than ,000,000 today, and get some concessions and extras thrown in to boot.

Another example of a high end ship that would make do well as a commercial cruise ship, plus accommodate a hundred or so full-time live aboard co-owners is the Dream Princess, originally named Song of Norway.

GRT: 22,945

Max Draft: 6.7 M in sea water

Length: 194 M.

Total No. of Cabins: 538

Total No. Of Beds + Berth: 1280

Outside Cabins: 346

Inside Cabins: 192

Cabins size range: SQ. M: 11 -18.

Main Engines: 4 Wartsila Sulzer - 18,000 HP.

Service Speed: 16 Knots.

Public Rooms:

Main Dinning room - "King & I"- about 500 pax.

South Pacific Lounge about 400 pax.

My Fair Lady Lounge about 500 pax.

Bars- 5

Self Service Restaurant on the swimming pool deck

Large Swimming pool

Disco

Casino

Duty Free Shops

Gym

8 passenger decks

extensive outdoor areas

Ship was redecorated / refurbished extensively during 2005.

The asking price on this ship is million USD. Divide the asking price by the number of cabins and the average cost per cabin would be ,620. Of course some cabins are better than others so co-owners would have to agree of the shared usage before agreeing to the purchase.

I have some bad news for the ship owners and some good news for you. This ship will not sell for the asking price.

Fuel

Ship fuel is cheaper than automobile fuel for a few reasons. There are no road taxes on ship fuel of course and also it is different fuel. Ships main engines usually run on IFO180 or IFO380. Generator engines tend to be more finicky and commonly require diesel (MDO), which is still cheaper than automotive diesel. IFO 180 and 380 costs much less than MDO, usually about half the price. Ships consume a lot of fuel. So fuel cost is a major concern. I have some suggestions. If I were a co-owner of a ship I would be willing to invest a little more in the ship to increase fuel efficiency, and thus lower operating costs. There are many things that can be done to increase fuel efficiency. I would start with hull resistance. There is a new silicone-based paint from International Paints that when applied to the hull reduces amount of resistance in the water sufficiently to result in a 3 to 5% decrease in fuel consumption. A similar coating for the propellers also has been proven to increase fuel efficiency.
In addition to hull and prop coatings, there is an even more promising way to achieve dramatic fuel savings.

There is a company called Kiteship that has developed and produces kites for racing sailboats. These sailing kites do not require a mast. The kites fly high above the vessel, attached by cable and controlled from the vessel. Dave Culp of Kiteship has done a technical feasibility study on fitting a very large kite onto a conventional cruise ship. This would dramatically reduce fuel consumption. It would convert a fuel guzzler to a "green machine." This is tantamount to converting a powerboat into a sail boat. The design of a cruise ship limits the amount of sail that a conventional ship can safely accommodate. A cruise ship lacks the ballast of a sail boat. If used in addition to the main engine(s) the kite will increase fuel efficiency. If the kite is used to pull the ship with the main engines shut down the ship's speed will be reduced substantially. However, in this case, not only would the ship save IFO (main engine fuel) but also save MDO (generator engine fuel). If the kite were pulling the ship unassisted by the ship's engines, then the propellers could be used to propel the ship's generators without firing up the diesel generator engines. Even if the ship were traveling very slowly in the water, the propellers would turn in reverse if freed from the main engines. This is a very simple and easy task for the ship's engineer to accomplish. In other words, the ship can be pulled by the kite, and that motion will push the ship's propellers providing power to produce electricity and power the air-conditioning without using any fuel. The trade-off is a loss of speed and also some tacking is required, further reducing actual speed. What's the rush? Why not go for maximum fuel savings? The salient point is that a high flying large kite can pull a cruise ship. If I were a co-owner of a cruise ship I would hope to find like minded co-owners who would be receptive to using such state-of-the-art technologies to save fuel.

There are hundreds of cruise ships on the market but I will just mention one more here. This cruise ship has RO/RO (Roll-On, Roll-Off) capability. This would be very convenient for live aboard owners who want to bring their "toys" with them. The garage deck will accommodate 6 to 8 trucks, or 60 to 80 cars. That converts to a lot of co-owner toys such as motorhomes, travel trailers, campers, cabin cruisers, ski boats, jet skis, sailboats, houseboats, bass boats, motorcycles, ATVs, cars, and trucks.

Specifications:

650 PASSENGER CRUISE SHIP FOR SALE

VESSEL IS FULLY FITTED WITH SPRINKLERS

SOLAS 2005/2010 FITTED

TWIN SCREW CRUISE

VESSEL DIMENSIONS LOA 137.10 X BREADTH 21.00 X 5.8 METERS DRAFT

BUILT 1981 / POLAND

REBUILT 1991

REBUILT - UPGRADED 1999

REBUILT - RENOVATED - REFURBISHED 2002

CLASS R.S. ICE CLASS L2

GRT 12637

PASSENGERS 650 IN 230 CABINS (BASIS 3 BERTH OCCUPANCY)

ALL CABINS WITH PRIVATE FACILITIES (INCLUDING SUITES AND SEMI SUITES)

9 DECKS

HELICOPTER PAD

MAIN ENGINES SULZER 4 X 4,350 BHP

SPEED ABOUT 17.5 / 15 KNOTS ON ABOUT 45 / 36 M/TONS + 9 TONS DIESEL OIL

BOWTHRUSTER 800 BHP

STABILIZERS

120 TONS PER DAY WATER MAKER

RECEPTION

LOUNGE

RESTAURANT (420 SEATS)

NINE BARS

CASINO

DUTY FREE SHOP

CHILDREN'S PLAY ROOM - TWO DISCOS

TV/MOVIE CORNER

DUTY FREE SHOPS

HAIRDRESSING SHOP

JACUZZI

ONE PASSENGER ELEVATOR

LAUNDRY SPA & HEALTH CLUB

TWO SAUNAS

CLINIC

TWO SWIMMING POOLS (ADULT & CHILDREN)

Cost per cabin based on asking price, ,739. This ship will sell for less than asking price. It is already SOLAS 2010 compliant. It would cost very little to put into commercial service.

Conclusion

Becoming a co-owner of a cruise ship is not a far fetched idea. It is practical and feasible if you are able to find like minded people who would be willing to share the expenses.

You Can Be a Cruise Ship Owner Even If You Are Not Rich
Twin Bed Mattress Size

Christmas Sales Bedsack Classic Mattress Pad Twin Size, White 201

Dec 21, 2011 05:54:51

Christmas Bedsack Classic Mattress Pad Twin Size, White Deals
Click for larger image and other views

Bedsack Classic Mattress Pad Twin Size, White

>> Click here to update Christmas prices for Bedsack Classic Mattress Pad Twin Size, White <<

Christmas Sales Bedsack Classic Mattress Pad Twin Size, White Feature

  • Top fabric that's soft and quiet with a stylish and functional sonic double onion quilted pattern
  • Unique design completely covers and protects top and side of mattress
  • 2-Ounce of super soft low melt Perfect Puff polyester fiberfill
  • Hypo-allergenic; machine wash and dry; made in the USA
  • Extremely economical solution to rejuvinate your mattress; Buy and extra and rejuvinate and protect your box spring too


Christmas Sales Bedsack Classic Mattress Pad Twin Size, White Overview

Bedsack Twin Size Classic Mattress pad. This durable mattress pad has a 100-percent polyester non woven top and reverse fabric. With 2 ounces of 100-percent low melt Perfect Puff polyester fiber fill it will help rejuvenate your mattress and provide a more sound night's rest all at an economical price. Being hypo-allergenic this mattress pad is also perfect for the sensitive sleeper . A sonic double onion quilted pattern is designed into this pad and extends all the way down the sides of your mattress. The benefit is that it holds it all together, provides complete protection, adds a touch of style, eliminates shifting and bunching and promotes better fit for your sheets. For added convenience this easy to clean pad is machine wash and dryable. Made in the USA



SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas Bedsack Classic Mattress Pad Twin Size, White ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Bedsack Classic Mattress Pad Twin Size, White

Limited Offer Today!! Bedsack Classic Mattress Pad Twin Size, White Christmas and Cyber Monday 2011 Deals

Comforter Sets Queen Canon Digital Camera 14 Mp Baby Travel Cots

Sleep Studio 2-Inch ViscO2 Ventilated Memory Foam Mattress Topper, Queen

Christmas Sales Sleep Studio 2-Inch ViscO2 Ventilated Memory Foam Mattress Topper, Queen 201

Dec 20, 2011 09:44:17

Christmas Sleep Studio 2-Inch ViscO2 Ventilated Memory Foam Mattress Topper, Queen Deals
Click for larger image and other views

Sleep Studio 2-Inch ViscO2 Ventilated Memory Foam Mattress Topper, Queen

>> Click here to update Christmas prices for Sleep Studio 2-Inch ViscO2 Ventilated Memory Foam Mattress Topper, Queen <<

Christmas Sales Sleep Studio 2-Inch ViscO2 Ventilated Memory Foam Mattress Topper, Queen Feature

  • Breathable , open cell ViscO2 ventilated memory foam mattress topper
  • Formula uses plant-based ingredients
  • Provides comfort and pressure relief to reduce tossing and turning
  • Spot clean only, do not machine wash or dry
  • Measurements: 58 x 78 x 2 inches


Christmas Sales Sleep Studio 2-Inch ViscO2 Ventilated Memory Foam Mattress Topper, Queen Overview

ViscO2 memory foam combined with ventilation provides the perfect balance of support, comfort and temperature. ViscO2 is a breakthrough in memory foam technology with the same performance as the leading brand, but with 5 times greater airflow to prevent overheating. 3 zones of air channels to allow even more air circulation at the head and feet and more support in the torso area. ViscO2 + ventilation = more oxygen (O2) under the covers for a healthier, more comfortable night's sleep. Unlike other leading memory foams, ViscO2 returns to its original size faster and is not prone to permanent shrinkage from compression. Uses MicroSafe, an anti-microbial treatment to guard against bacterial odors and resist mold and mildew.



SAVE NOW on Christmas Sales Offers below!

Available In Stock.

This Christmas Sleep Studio 2-Inch ViscO2 Ventilated Memory Foam Mattress Topper, Queen ships for FREE with Super Saver Shipping.

Price : Click to Check Update Prices Please.

Sleep Studio 2-Inch ViscO2 Ventilated Memory Foam Mattress Topper, Queen

Limited Offer Today!! Sleep Studio 2-Inch ViscO2 Ventilated Memory Foam Mattress Topper, Queen Christmas and Cyber Monday 2011 Deals

Redfield Binoculars 10X42 Tv Wall Mounts Articulating Manfrotto Tripod Bags